Petzl Rig Self-braking Descender

Key Features

• Auto-lock system locks the load automatically
• The rope can be loaded without removing the device from the harness
• Stainless steel wear plate improves durability
• Device marking helps to install the rope properly
• Anti-error catch helps prevent incorrect rope installation
• Two descent modes - over the stainless-steel wear plate or in the v-shaped rope friction channel
• Ergonomic handle for controlled descents
• Rope can be pulled through the device without manipulating the handle (during occasional ascent, a reverse haul system or belaying)
• Maximum descent speed of 2 metres per second (2m/s) (0.5 metres per second (0.5m/s) for loads over 120kg
• 200kg rescue capacity
• Certified Belay device

Compatibility

• Use the Petzl Rig with low stretch rope conforming to EN 1891 Type A with a diameter between 10mm-11.5mm.
• If belaying, use low stretch rope conforming to EN 1891 Type A or B or Dynamic rope to EN 892 with a diameter between 9mm-11mm.